![]() ![]() If you don't see your printer manufacturer, select the Windows Update button to update the list. On the left, select your printer manufacturer, and on the right, select your printer driver. Select your device’s architecture, and then select Next. If you don’t see your printer listed, select Add, and in the Welcome to the Add Printer Driver Wizard, select Next. Select the Drivers tab, and see if your printer is listed. Scroll down to Related Settings and select Print server properties. If you double-click the installation file and nothing happens, follow these steps: Wait for your device to find nearby printers, select the one you want, and then select Add device. Under Printers & scanners, find the printer, select it, and then select Remove device.Īfter removing your printer, add it back by selecting Add a printer or scanner. ![]() Select Start, then select Settings > Devices > Printers & scanners. Then follow these steps to remove and reinstall the printer. After you download them, double-click (or double-tap) the file to begin installing it. Locate and download the latest driver for your printer model, then follow the installation instructions on the manufacturer’s website. Some support sites let you search for your printer model number directly. To find it, search the internet for the name of your printer manufacturer plus the word “support,” such as “HP support.”ĭriver updates are often available in the “Drivers” section of a printer manufacturer’s website. Get to know more details of each function and configuration please go to Download Center to download the manual of your product.Check your printer manufacturer’s support site. Until now,all the configuration are finished. If you want to set it as default printer, please select it as the default printer. Step 7 Your printer will be displayed in the box. If can’t find the driver of your printer, please try Generic PostScript Printer / Generic PCL Laser Printer or Auto Select. ![]() Address: 192.168.1.10 or 192.168.0.10 ( which depends on the IP of printer server)Īt last, select the driver of your printer and click Add to finish the process.Step 6 Choose IP at the top bar and configure the options as the following: ![]() In the new window, please click “+” to add a printer. Step 5 Click Apple icon, go to System Preferences -> Printer & Scanner. Click Ethernet and select Configure IPv4 as Using DHCP. Connect your MAC PC to your router with wire or wireless.Ĭlick Apple icon, go to System Preferences-> Network. Step 4 Connect the printer to Print Server and Print Server to one LAN port of your router. Note: The TL-PS110U is produced without password by default. Then please go to Setup-> TCP/IP page, change the IP to 192.168.1.10 and click Save & Restart button. Step 3 Open the Safari and type in the address bar. Step 2 Go to Ethernet, Advanced, select Manually on Configure IPv4 field and set the IP address & Subnet Mask like the following. On your MAC PC, click Apple icon and go to System Preferences. Step 1 Connect your MAC PC to the print server with an Ethernet cable directly. In this guidance, 192.168.1.1 is assumed as the IP of the router. If your router’s IP is 192.168.0.x (x is between 1~254), you can skip to step 4. Normally, it’s the gateway of your computer. Before doing the settings, please prepare the IP of the router. The Default IP of the print server is 192.168.0.10. System Information: Mac OS X EI, Version 10.11.5īelow is a topology of normal network and taken as example in this guidance. Note: TL-PS110U is used for demonstration in this article. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |